#Format usb on mac for fat32 how to
#Format usb on mac for fat32 for mac
#Format usb on mac for fat32 windows

Please note: since OS X 10.11 El Capitan, Apple made a few changes to Disk Utility (see details from this ComputerWorld article).

#Format usb on mac for fat32 for mac

The first part is for Mac users, and the second part is for PC users (Windows 10 based). Read this USB drive data recovery guide for more information.Īlso, since I don’t know whether you are on a PC or Mac to perform this operation, I’m here to break down this guide into two parts. Because the process of reformatting a disk drive will very likely erase all content and make recovery impossible. Important: make sure you have at least one backup of all the data stored on the device before you proceed. Note: since I’ve formatted my Lexar drive on my Mac, now it shows exFAT. In the new Properties window, check General > File system and you’ll see what type of file system your flash drive is currently with. Go to This PC, under “Devices and drives,” highlight the disk that represents your USB flash drive, right-click and select Properties. That means my Lexar disk is currently with the FAT32 file system. In the new dialogue, pay attention to General > Format, where it says “MS-DOS (FAT32)”. Once the Lexar disk shows up on the desktop, right-click on the drive icon and select “Get Info.”Īlternatively (in case the disk does not show up on your desktop), open Finder, on the sidebar menu locate your USB drive under Devices, right-click and select “Get Info.” I’m here to use a 32GB Lexar USB key as an example.

Make sure your device can be detected and recognized.

#Format usb on mac for fat32 how to

Read on for step by step instructions… How to Check a USB Drive’s File System?įirst of all, plug your flash drive into the USB port on your computer. How to know what current file system your flash drive is with, and how to format it to exFAT? Now that you’ve learned exFAT is the ideal file system to go. This is because an NTFS-based drive can be read by macOS but you can’t write data to the drive. You may notice that in NTFS is marked “Partially” under the Compatible with macOS column. You should go ahead and format your storage drive with exFAT instead of FAT32, assuming that all devices you want to use the drive support exFAT. Therefore, it’s perfect for a USB flash drive or external disk, especially when you need to save files more than 4GB in size.

#Format usb on mac for fat32 windows

How to Check a USB Drive’s File System?Īs you can see, exFAT is the only file system that works with all versions of Windows and macOS and does not have any max file-size or partition-size limits.Note that there is another file system called FAT32 that pretty much does the same thing but with one major flaw. In other words, you can access the drive and transfer data without any hassles. If your disk was initially formatted to NTFS on a PC (or HFS+ on a Mac), most likely you’ll suffer limitations, for example, the data on your drive can’t be read or written on one of your computers.įortunately, there is a file system (actually two, I’ll explain) that you can format your flash drive to be fully compatible with Mac and PC.

If you have a USB drive, and you plan to use it on both a Mac and PC, things can get a bit tricky here. By default, Macs are with HFS+ (since 2017 there’s new Apple File System, APFS, optimized for flash storage), while PCs are with NTFS. It’s no surprise that PCs and Macs do not work well with each other, due to differences between the two operating systems (Windows vs.